To Next PageTo Next PageHow to fix poor sound quality or recording issues on Panasonic SC-PM28?
If your Panasonic Stereo System is producing poor quality sound or is unable to record, try cleaning the heads. If the erasure prevention tabs have been removed, cover the holes with adhesive tape.
What to do if my Panasonic Stereo System has no sound or displays an error?
If you're experiencing no sound, reversed sound, sound from only one speaker, or humming during play with your Panasonic Stereo System, and you see error messages like “ERROR”, “– –:– –”, or “F61” on the display, the speaker cords may be shorted. Turn off the unit, check and correct the connections, then turn it back on. Also, keep AC power cords and fluorescent lights away from the unit's cables. If the issue persists, review the instructions to ensure correct operation. If you plugged in the AC power cord for the first time or there was a recent power failure, set the time. If none of these steps resolve the problem, it may indicate a power supply issue, and you should consult a dealer.
Why is there noise or distorted sound on my Panasonic Stereo System?
If you are experiencing issues such as noise, a flickering or unlit stereo indicator, distorted sound, a beat sound, or a low hum during AM broadcast with your Panasonic Stereo System, try the following: Use an outdoor antenna. Turn off the TV or separate it from the unit. Separate the antenna from other cables and cords.
General| Brand | Panasonic |
|---|---|
| Model | SC-PM28 |
| Category | Stereo System |
| Language | English |
