RQT6885
13
Listening operations
1
2
3
4
A
DOWN
VOLUME
UP
CD CHANGE
CD CHECK
CD 1 CD 2 CD 3 CD 4 CD 5
CD 1 CD 2 CD 3 CD 4 CD 5
1
DEMOSTOP
,
CD CHECK
2 3
CD
/
1
4
CD indicator
CDs
Listening to a CD placed in a specific
tray
Preparation: Press [CD 2/J] and then [STOP L, –DEMO].
Selecting the desired tray number and placing
a CD in it
1 Press [c CD CHANGE].
2 Within about 10 seconds
Press [CD 1] – [CD 5] to open the tray and
insert the CD.
Press [c CD CHANGE] again to close the tray.
Repeat steps 1 and 2 to insert other CDs. You can load
up to 5 CDs.
Listening to the CD placed in a specific tray
3 Press [CD 1] – [CD 5] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops auto-
matically.
4 Adjust the volume.
To remove the CD
While one CD is playing (except in All-Disc Random play or
program play), you can change the CDs in the other trays.
1 Press [c CD CHANGE].
2 Press [CD 1] – [CD 5].
Press [c CD CHANGE] again to close the tray.
A To check which tray the CD is in (CD CHECK)
The CD check feature lets you check whether a 12cm CD is
in a tray.
Press [CD CHECK].
If the player is stopped, all trays will open.
If a CD is being played, the corresponding tray will not open.
Press [CD CHECK] again to close the trays.
• Do not remove or insert CDs during a CD check.
• Do not pull out the trays during a CD check.
Elapsed play time
Track number
Disc tray
Label must face upward.
Tray
number
RQT6885(11-15)new2.P65 1/14/03, 11:55 AM13
To Next Page
Loading...
