Panasonic SC-PM33DB - DAB Operation and Presetting; DAB Station Operation

RQTV0123
14
DAB operation
DAB operation
1
Press [TUNER/BAND] to enter DAB mode.
The unit comes on.
Note
“Scan Failed.”appears if no stations are memorized. If this occurs,
adjust the antenna and try Auto scaning.
2
Press [PLAY MODE] to select “STATION TUNE”
Each time you press the button:
“STATION TUNE”
“PRESET TUNE”
3
Press [ /REW/4] or [ /FF/¢] to select a station.
The station name changes in alphanumeric order.
DAB Auto Scan
DAB Auto Scan
Press and hold [PLAY MODE] until “DAB Auto Scan”
appears.
When a frequency is tuned by Auto scanning on this unit,
the ensemble corresponding to the frequency is displayed
for approximately 2 seconds.
Note
• When updating memory with Auto scan, preset stations are not
erased or changed
• When a frequency cannot be received, the previous memory is
restored.
• Total stations received is displayed for approximately 2 seconds.
Presetting
Presetting
To Preset
Up to 20 channels can be set.
1
Press [ /REW/4] or [ /FF/¢] to select a station.
2
Press [PROGRAM].
3
Press the numeric buttons to select a channel.
Note
You cannot preset stations when the station is not broadcasting or
when you are selecting a secondary service.
DAB (continued)
CLEAR
CLEAR
0-$"0-$"
Numeric
buttons
Numeric
buttons
PM32-33DB_EB_En.indd 14PM32-33DB_EB_En.indd 14 3/1/06 12:12:28 PM3/1/06 12:12:28 PM