- Making the connections
Connect the AC mains lead only after all other connections have been made.
1
Connect the DAB “T” antenna
The cross bar of the T should be kept fi rmly stretched.
Find a position with good reception.
There is a function on the unit to check signal quality.
For best reception
A DAB outdoor antenna is recommended (➡ page 6).
Be sure to fully
tighten the screw.
Tape the antenna to a wall or column, in a
position with least amount of interference.
3
Connect the FM indoor antenna.
Adhesive
tape
FM indoor
antenna
PMX2DB_EB-En.indd 4PMX2DB_EB-En.indd 4 3/7/07 11:25:26 AM3/7/07 11:25:26 AM
To Next Page
Loading...
