9
RQT0A76
∫ To display information
([CD], [MEMORY], [USB], [BLUETOOTH])
You can display the track, artist, album name, file type,
bit rate, and other information. (The information varies
depending on the audio source.)
Press [DISPLAY] repeatedly.
e.g. [MEMORY]
e.g.
[USB] (MP3)
≥ To use this unit’s remote control with a Bluetooth
®
device, the
Bluetooth
®
device must support AVRCP (Audio Video
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
≥ [CD], [MEMORY], [USB]:Tracks can be selected by pressing the
numeric buttons.
≥ Maximum number of displayable characters:
Approx. 32
≥ This system supports ver. 1 and 2 ID3 tags.
≥ Text data that is not supported will not be displayed or will be
shown differently.
You can play your favourite internal memory contents
stored under one of (FAVOURITE) [1] to [5].
Preparation
Turn the unit on.
1 Press [MEMORY] to select “MEMORY”.
2 Press [FAVOURITE] and then press one of [1] to
[5] on the remote control.
≥ Alternatively, press one of (FAVOURITE) [1] to
[5] on this unit.
You can turn the unit on, and start playing all the
contents in the internal memory randomly and
repeatedly, with a single press of a button.
Press [MIX PLAY].
≥ Playback will start and “MIX PLAY” will be shown for a few
seconds.
≥ The audio source will change to “MEMORY” automatically.
≥ “RND” and “`” are displayed.
“M-AT”: The number for (FAVOURITE) [1] to
[5], the number of albums, the number
of tracks
(e.g. “M1-A2T030” indicates that (FAVOURITE) [1]
consists of 2 albums and
30 tracks.)
“A”: Album number
“T”: Track number
(“ ” stands for a number.)
“ ”: Album “ ”: Track
Favourite play ([MEMORY])
One-touch mix play ([MEMORY])
SC-RS52_EGEBGN_RQT0A76-B.book 9 ページ ２０１６年２月１９日 金曜日 午前８時５９分
To Next Page
Loading...
