Panasonic SC-TMAX40 User Manual

Confidential
Until:
24 Jun 2019
5
TQBJ2189
Making the connections
Connect the AC power supply cord only after all the
other connections have been made.
1 Connect the FM indoor antenna.
Put the antenna where reception is best.
2 Connect the AC power supply cord.
Do not use any other AC power supply cords except
the supplied one.
Hold the unit when connecting or disconnecting the
AC power supply cord to prevent the unit from falling.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Note:
Keep the antennas away from the AC power supply cord to
avoid picking up noise.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with those in
the remote control.
Adhesive tape
(not supplied)
If the power plug does not fit your socket, use the
supplied power plug adapter.
To household AC outlet
SC-TMAX40.50PU_TQBJ2189 En.fm Page 5 Wednesday, June 12, 2019 3:29 PM
offset printing

Panasonic SC-TMAX40 Specifications

General

Tweeter	Yes
Woofer diameter	100 mm
Tweeter diameter	60 mm
Audio output channels	2.1 channels
Subwoofer driver diameter	200 mm
AC adapter input voltage	220 - 240 V
Preset stations quantity	30
Impedance	6 Ω
RMS rated power	1200 W
Peak Music Power Output (PMPO)	13200 W
Total Harmonic Distortion (THD)	30 %
Wi-Fi	No
USB port	-
Bluetooth version	5.0
Power source type	AC
USB 2.0 ports quantity	2
Connectivity technology	Wired
Product type	Mono portable speaker
Product color	Black
Recommended usage	Universal
Audio formats supported	MP3
Mobile operating systems supported	Android
AC adapter frequency	50 Hz
Power consumption (standby)	0.6 W
Power consumption (typical)	196 W

Weight and Dimensions

Depth	326 mm
Width	305 mm
Height	804 mm
Weight	17500 g
Package depth	380 mm
Package width	880 mm
Package height	420 mm
Package weight	20000 g