RQT8251
36
36
Specifications
ENGLISH
Specifications
AMPLIFIER SECTION
VK725D
RMS Output Power: Dolby Digital Mode
Main 70 W per channel (6 Ω), 1 kHz, 10% THD
Surround Ch 55 W per channel (6 Ω), 1 kHz, 10% THD
Center Ch 70 W per channel (6 Ω), 1 kHz, 10% THD
Total RMS Dolby Digital mode power 320 W
PMPO output power 4000 W
VK825D
RMS Output Power: Dolby Digital Mode
Main 85 W per channel (4 Ω), 1 kHz, 10% THD
Surround Ch 60 W per channel (4 Ω), 1 kHz, 10% THD
Center Ch 80 W per channel (4 Ω), 1 kHz, 10% THD
Subwoofer Ch 90 W per channel (4 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power 460 W
PMPO output power 5600 W
VK925D
RMS Output Power: Dolby Digital Mode
Front – High Ch 95 W per channel (4 Ω), 1 kHz, 10% THD
Front – Low Ch 50 W per channel (8 Ω), 100 Hz, 10% THD
Surround Ch 75 W per channel (4 Ω), 1 kHz, 10% THD
Center Ch 100 W per channel (4 Ω), 1 kHz, 10% THD
Subwoofer Ch 95 W per channel (4 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power 730 W
PMPO output power 8000 W
FM/AM TUNER, TERMINALS SECTION
Preset station FM 15 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range 87.50 to 108.00
MHz (50 kHz step)
Sensitivity 2.5
µV (IHF)
S/N 26
dB 2.2
µV
Antenna terminals 75
Ω (unbalance)
Amplitude Modulation (AM)
Frequency range 522 to 1629
kHz (9
kHz step)
520 to 1630
kHz (10
kHz step)
AM sensitivity S/N 20 dB at 999 kHz 560
µV/m
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux 250 mV, 20 kΩ
Phone jack
Terminal Stereo, 3.5 mm jack
Mic jack
Sensitivity 0.7 mV, 600 Ω
Terminal Mono, 6.3 mm jack (2 system)
CASSETTE DECK SECTION
Type Auto Reverse
Track system 4-Track, 2 Channel
Head Record/Playback Solid Permalloy Head
Erasure Double Gap Ferrite Head
Motor DC Servo Motor
Recording System AC Bias 100 kHz
Erase System AC Erase 100 kHz
Tape Speed 4.8 cm/s
Overall Frequency Response (+3, –6 dB) at DECK OUT
Normal 35 Hz to 14 kHz
S/N Ratio 50 dB (A weighted)
Wow and Flutter 0.18% (WRMS)
Fast Forward and Rewind Time
Approx. 120 seconds with C-60 cassette tape
DISC SECTION
Disc played (8 cm or 12 cm)
(1) DVD (DVD-Video, DVD-Audio, DivX
6,
7
)
(2) DVD-RAM (DVD-VR, JPEG
4,
7
, MPEG4
5,
7
, DivX
6,
7
)
(3) DVD-R (DVD-Video, DivX
6,
7
)
(4) DVD-RW (DVD-Video, DVD-VR, DivX
6,
7
)
+R/RW (Video)
(5) CD, CD-R/RW [CD-DA, Video CD, SVCD
1
, MP3
2,
7
,
WMA
3,
7
, JPEG
4,
7
, MPEG4
5,
7
, DivX
6,
7
,
HighMAT Level 2 (Audio and Image)]
1
Conforming to IEC62107
2
MPEG-1 Layer 3, MPEG-2 Layer 3
3
Windows Media Audio Ver. 9.0 L3
Not compatible with Multiple Bit Rate (MBR)
4
Exif Ver 2.1 JPEG Baseline files
Picture resolution: between 160 x 120 and 6144 x 4096 pixels
(Sub sampling is 4:2:2 or 4:2:0)
5
MPEG4 data recorded with Panasonic SD multi cameras or DVD
video recorders
Conforming to SD VIDEO specifications (ASF standard)/
MPEG4 (Simple Profile) video system/G.726 audio system
6
DivX 3.11, 4.x, 5.x
GMC (Global Motion Compensation) is not supported
7
The total combined maximum number of recognizable audio,
picture and video contents and groups: 4000 audio, picture and
video contents and 400 groups
Pick up
Wavelength
DVD/CD 662 nm/785 nm
Audio output (Disc)
Number of channels 5.1 ch (FL, FR, C, SL, SR, SW)
Audio performance (measurement at: Line out terminal)
Frequency response
• CD-Audio 4 Hz to 20 kHz (+1 dB, –2 dB)
VIDEO SECTION
Video system
Signal system PAL625/50, PAL525/60, NTSC
Composite video output
Output level 1
Vp-p (75
Ω)
Terminal Pin jack (1 system)
S-video output
Y output level 1
Vp-p (75
Ω)
C output level 0.3
Vp-p (75
Ω) (PAL)
0.286
Vp-p (75
Ω) (NTSC)
Terminal S terminal (1 system)
Component video output
[NTSC: 525 (480)p/525 (480)i, PAL: 625 (576)p/625 (576)i]
Y output level 1
Vp-p (75 Ω
)
P
B output level 0.7
Vp-p (75 Ω)
P
R output level 0.7
Vp-p (75 Ω)
Terminal Pin jack (Y: green, P
B: blue, PR: red) (1 system)
RQT8251(36_37)new 6/13/05, 2:28 PM36
To Next Page