Panasonic SDR-S45 - Image Stabilizer Function

25
(ENG) VQT2L26
Reduces the image shaking (jitter) due to
hand movement when recording.
¬ Change the mode to .
//
Select the menu. (l 19)
≥ Set [E.I.S.] to [OFF] to cancel the function.
≥ When the Colour night view function is
used or the shutter speed is slower than
1/50 depending on the surrounding
darkness, the electrical image stabilizer
function does not work and the
indication flashes.
≥ In the following cases, the image stabilizer
function may not work effectively.
jWhen the zoom magnification is high
jLocation is extremely dark
jWhen you record a moving subject
while tracking it
≥ Stabilization may not be possible under
strong shaking.
≥ When a tripod is used, we recommend
that you turn the image stabilizer off.
Image stabilizer function
[RECORD SETUP] # [E.I.S.] # [ON]
SDR-S50
SDR-T50
SDR-H85
ヰハリハヴハ
Optical image stabilizer button
Pressing the button changes the
optical image stabilizer setting.
# # OFF
≥ Set the manual mode before setting
the Optical Image Stabilizer function
to off.
: Active mode
This setting gives more stabilization and
is suitable for recording when walking.
: ON
This setting is suitable for recording in a
stable state such as scenery.
SDR-S45
SDRS50&S45&T50&H85EP-VQT2L26_mst.book 25 ページ ２０１０年３月１１日 木曜日 午後５時２４分