29
(ENG) VQT2L26
Playback
Editing
2
Formatting
Please be aware that if a medium is formatted, then all the data recorded on the
medium will be erased and cannot be restored. Back up important data on a PC, DVD
disc etc.
Select the menu. (l 19)
/
Select [YES], then press the joystick.
≥ After formatting is complete, press the MENU button to close the message screen.
/
1 Select [SD CARD], [Built-inMemory] or [HDD] and press the joystick.
2 Select [YES], then press the joystick.
≥ After formatting is complete, press the MENU button to close the message screen.
/
≥ Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/
transferred.
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
[SETUP] # [FORMAT CARD]
[SETUP] # [FORMAT MEDIA]
Use this unit to format media.
Formatting built-in memory or HDD is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
SDRS50&S45&T50&H85EP-VQT2L26_mst.book 29 ページ ２０１０年３月１１日 木曜日 午後５時２４分
To Next Page
Loading...
