To Next Page
A
Ashley AdamsOct 28, 2025
What to do if the Panasonic SF4B shows an error indication?
- DDavid MorenoOct 28, 2025
An error indication may appear on the Panasonic Controller due to several reasons: * The fixed blanking function is set in all lights received / all lights blocked condition, or the muting function is set in all lights received condition. In this case, review the fixed blanking function in all lights received / all lights blocked condition, or the muting function in all lights received condition. * The copy function is used for units having different system configurations (different number of sensors, beam channels, or model numbers). Use the copy function only for units having identical system configurations. * In the copy function, data was downloaded without uploading first. Upload the data before downloading. * The password entered is incorrect. Input the correct password. If ...
General
