Panasonic SF4B Series

20© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Functional Descriptions
This device
SF4B / SF4B<V2> series
SF-C14EX
Copied
SF4B / SF4B<V2> series
SF-C14EX
Copied
SF4B / SF4B<V2> series
SF-C14EX
Original
Upload
Download
(Storage area for SF-C14EX)
3-2-4 Emission Intensity Control Function
This function reduces the emitting intensity.
It is useful for preventing interference from the emitter to the other devices.
Emission intensity control
 CLR (Ineffective) : Operating range is 0.3 to 9m for SF4B-HƑSF4B-HƑ<V2> (12 to 64 beam
channels) and SF4B-AƑSF4B-AƑ<V2> (6 to 32 beam channels), 0.3 to
7m for SF4B-FƑSF4B-FƑ<V2> and SF4B-HƑSF4B-HƑ<V2> (72 to 96
beam channels) and SF4B-AƑSF4B-AƑ<V2> (36 to 48 beam channels)
(factory setting).
 SET (Effective) : The operating range is reduced by approx. 50%.
3-2-5 Copy Function
This is a function to copy the setting of a
SF4B / SF4B<V2> series
to other
SF4B / SF4B<V2> series
and SF-C14EX
.
7KLVIXQFWLRQLVDYDLODEOHRQO\XQGHUWKHVDPHV\VWHPFRQ¿JXUDWLRQWKHQXPEHURIVHQVRUVWKHQXP-
ber of beam channels, same model No.).
All functions that are settable with this device can be copied.
Note that the password is also copied with this function.
The following operations are available with this function.
Ɣ Upload : Upload the functional setting data of SF4B / SF4B<V2> series or SF-C14EX to this
device.
Ɣ Download : Download the functional setting data of this device to SF4B / SF4B<V2> series or
SF-C14EX.
Ɣ Monitoring : Check the functional setting data saved in this device.
3-2-6 Muting Setting Changing Function
The setting of the muting function can be changed.
Setting of the muting function on each beam channel
Ɣ Each beam channel can be set to “effective / ineffective” in the muting function respectively. (Note)
Ɣ The factory setting of this function is effective for all beam channels.
Note: If the beam channel set to ineffective in the muting function is blocked, the safety output 1 / 2 of SF-C14EX becomes “OFF”
and the muting function is canceled.
Ɣ There are two setting methods, “Auto” and “Manual” to set muting beam channel.
 Auto setting : The beam channel which is currently blocked is set as the “effective” beam
channel. When all beam channels are in light receiving condition, the setting is
not accepted. Furthermore, in the state where emission is halted or all beam
channels are blocked, the all beam channels become “effective” in the muting
function.
 Manual setting : Each beam channel can be set to “effective / ineffective” in the muting function.
ON: The muting function is effective
OFF: The muting function is ineffective
Ramco Innovations
(
800
)
280-6933 www.PanasonicSensors.com