Panasonic SF4B Series

34© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Function Setting
3-3-8 External Device Monitor Setting Changing Function
*: When two or more SF4B / SF4B<V2> series are connected, cancel the protective function of all
SF4B / SF4B<V2> series.
<External device monitor>
CLR (Ineffective) : The external device monitor function is ineffective.
SET (Effective) : The external device monitor function is effective. (The factory setting is 300ms.)
Note: When using SF-C14EX, the display does not change even if ENTER key is pressed. (The external device monitor: Effective)
(Ineffective)
(Effective)
9. To Sub display
function / Protect
function
8. External device
monitor setting
changing function
Relay monitor setting
Send
(Error)
To 8
OK
NG
Time setting
(100ms)
(600ms)
(110ms)
(120ms)
࡮࡮࡮
Input pass-
word
key operation
: FUNCTION
: ENTER
: CANCEL
: -
: +
Ramco Innovations
(
800
)
280-6933 www.PanasonicSensors.com