Panasonic SF4B Series

33 © Panasonic Industrial Devices SUNX Co., Ltd. 2016
Function Setting
3-3-7 Interlock Setting Changing Function
*: When two or more SF4B / SF4B<V2> series are connected, cancel the protective function of all
SF4B / SF4B<V2> series.
<Setting of the interlock>
Mode 0: Start / restart interlock function (factory setting)
Mode 1: Start interlock function
Mode 2: Restart interlock function
Mode 3: Ineffective
Note: When using SF-C14EX, the display does not change even if ENTER key is pressed.
(Mode 0, Start / Restart interlock function)
(Mode 0)
Input
password
(Mode 1)
(Mode 2)
8. To External device
monitor setting
changing function
Setting selection
(Mode 3)
Send
(Error)
To 7
OK
NG
7. Interlock setting
changing function
key operation
: FUNCTION
: ENTER
: CANCEL
: -
: +
Ramco Innovations
(
800
)
280-6933 www.PanasonicSensors.com