Panasonic SF4B Series

38© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Function Setting
3-3-12 Override Setting Changing Function (Ver. 2.1 only)
Send
(Error)
To 12
OK
NG
Time setting
(60 sec.)
࡮࡮࡮
(70 sec.)
(80 sec.)
(600 sec.)
9. To Sub display
function / Protect
function
12. Override setting
changing function
Input pass-
word
*: When two or more SF4B / SF4B<V2> series are connected, cancel the protective function of all
SF4B / SF4B<V2> series.
Notes: 1) The factory setting is 60 sec.
2) It is not indicated when using with SF4B series. In addition, it is not indicated when using with SF-C14EX, either.
key operation
: FUNCTION
: ENTER
: CANCEL
: -
: +
Ramco Innovations
(
800
)
280-6933 www.PanasonicSensors.com