9
Setup
9
RQTX1131
≥Refer also to the operating instructions for your home theater unit.
≥When you enjoy 7.1-channel playback, refer also to “Using the surround back speakers” (B 10).
Conserving power
The wireless system consumes a small amount of power,
even when it is off (approx. 0.3 W). To save power when
the unit is not to be used for a long time, unplug it from
the household mains socket.
Making the wireless link
1
Turn on the wireless system.
Unit on/off button [C I, BÍ]
Use this button to turn the unit on and off.
C I: The unit is on. BÍ: The unit is off.
WIRELESS LINK indicator
Red: The unit is on and the wireless link is
deactivated.
Green: The unit is on and the wireless link is
activated.
2
Turn on your home theater unit.
The wireless link indicator on your home theater unit
will be turned on.
≥
The type of the indicator varies according to the
home theater unit.
3
Start play on the home theater unit.
≥
If the indicator is flashing, refer to
Troubleshooting guide (
B
11).
e.g. Display on the home theater unit
SH-FX71_RQTX1131-B_En.book Page 9 Thursday, January 14, 2010 5:18 PM
To Next Page
Loading...
