4.1 Troubleshooting
User Manual 141
"Voice Msg Full" is displayed. • The maximum voice message recording time
has been reached.
Delete voice messages stored in your
personal message area or in the common
message area.
It may take about 10 seconds for the display
to return to the idle status display even if the
remaining recording time becomes 5 minutes or
more.
( 1.5.5 Using Voice Messaging (Built-in
Voice Message [BV]))
A power failure has occurred. • When a power failure occurs...
All functions of the PBX and Panasonic PTs
stop. The following outside (CO) lines will be
connected to the assigned extensions:
Outside (CO) line 1: extension jack 01
Outside (CO) line 4: extension jack 09
Outside (CO) line 7: extension jack 17
This allows outside (CO) line conversations
between the specified extensions and outside
destinations.
• When the power is turned back on...
Your PBX restarts with the stored data
automatically. Memory is protected by a factory-
provided lithium battery. There is no memory
loss except for the data associated with
Automatic Callback Busy, Redial, and Call Park.
Problem Remedy
To Next Page
Loading...
