Panasonic TC-14A04A User Manual

Service Manual
Order DCS - JUN2004 - 003 - MS
Color Television
GP3 CHASSIS
TC-14A04A
TC-20A04A
Panasonic
®
© 2004 Panasonic da Amazônia S/A.
CS Division
Technical Support
Supplied Accessories:
• 1 Remote Control Transmitter
• 1 300Ω/75Ω Balum
• 2 “AA” (or R6) batteries (1.5V; ABNT/IEC)
• 1 Internal antenna (for TC-14A04A only)
Specifications are subject to change without notice. Weight and dimensions shown are approximate.
Remote Control Transmiter: TNQ2B2902
Power Source 3V (2 AA type batteries)
Infrared Length 9500 Å (Angstron)
Number of Buttons 29 keys
Dimensions (W x H x D) (54 x 27 x 135) mm
TELEVISION
Power source
Consumption
Antenna input jack
Color systems
Tuning system
Channel capability
Picture tube (Diagonal Visual)
Audio output
Video input jack
Video Outlet
Dimension (width, height, depth)
Weight
TC-14A04A
110/220 V AC, 50/60 Hz automatic switch
51 W
75 ohms - VHF/UHF/CATV
PAL-M/NTSC/PAL-N
F.S.T.
2 to 13 (VHF)
14 to 69 (UHF)
1 to125 (CATV)
Panablack 33 cm
3 W RMS
1 AV (back)
1 (back)
370 x 351 x 366 mm
9,6 kg
Specifications
TC-20A04A
110/220 V AC, 50/60 Hz automatic switch
61 W
75 ohms - VHF/UHF/CATV
PAL-M/NTSC/PAL-N
F.S.T.
2 to 13 (VHF)
14 to 69 (UHF)
1 to125 (CATV)
Panablack 48cm
3 W RMS
1AV (back)
1 (back)
502 x 455 x 471 mm
17 kg

Panasonic TC-14A04A Specifications

General

Brand	Panasonic
Model	TC-14A04A
Category	TV
Language	English

Summary

Important Safety Notice

General Service Guidelines

Operating Instructions

IC601 Pinout Description

IC601 Pinout Details

IC Voltage Tables

IC601 Block Diagram

TV Adjustments and Calibration

Service Mode Operation

Procedures for entering, exiting, and navigating the service mode.

CHK1 Mode Adjustments

Adjusting options and parameters within CHK1 service mode.

CHK2, CHK3, CHK4 Mode Adjustments

CHK2 Mode Adjustments

Parameters and procedures for adjusting the TV in CHK2 mode.

CHK3 Mode Adjustments

Parameters and procedures for adjusting the TV in CHK3 mode.

CHK4 Mode Adjustments

Parameters and procedures for adjusting the TV in CHK4 mode.

Specific Adjustment Procedures

RF AGC Adjustment

Procedure for adjusting the RF Automatic Gain Control.

Anode and Heater Voltage Confirmation

Confirms anode and heater voltages for critical components.

Color and Tint Calibration

PAL Color Output Signal Adjustment

Procedure to adjust PAL color output signals and OSD color.

NTSC Sub-Tint Calibration

Protection Circuit Confirmation

Confirms the operation of the protection circuit shutdown feature.

Picture Quality Calibration

Sub-Bright and Sub-Contrast Calibration

Focus Calibration

Purity Calibration

Convergence and Cut-off Calibration

White Quality Calibration

Convergence Calibration

CRT Cut-Off Calibration

Vertical Deflection Calibration

Vertical Deflection Calibration & Confirmation

White Balance Calibration

Schematic Diagrams and Layout

CRT PCB Schematic Diagram

Main PCB Schematic Diagram

Exploded View

Parts Lists

Replacement Mechanical Parts List

Replacement Electrical Parts List