12
Cable cover removal and fitting
Connections
Note:
Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be
routed through the antenna cover.
Connect headphones / earphones as follows.
ANT
DC IN 15V
(Optional)
(M3 plug)
Use Volume Up
or Down button to control volume level. (See page 15)
Connecting Headphones / Earphones
Removal
1.Disengage the claws at the
uppermost end.
2.Slowly pull out in the
upward direction.
Fitting
1.Insert the claws (at 2 points)
at the bottom.
2.Push in the TOP.
1
2
1
2
To Next Page
Loading...
