Panasonic TC-29FJ30LA User Manual

Service Manual
TC-29FJ30LA
GP3 Chassis
TELEVISOR
Power source
Consumption
Antenna input jack
Color systems
Tuning system
Channel capability
Picture Tube (visual diagonal)
Potência de áudio
Video input jack
Audio input jack
Video output jack
Audio output jack
DVD input jack
Dimension (width, height, depth)
Weight
REMOTE CONTROL TRANSMITER:
• Model: TNQ2B3302
• Power source: 3V (2 AA type batteries)
• Infrared Length: 9500 Å (angstron)
SUPPLIED ACCESSORIES:
• 1 Remote Control Transmitter
• 1 300Ω/75Ω Aerial Adaptor
• 2 “AA” type batteries
Specifications
TC-29FJ30LA
110V / 220V AC, 60Hz
automatic switch
129W
75Ω - VHF/UHF/CATV
PAL-M / NTSC / PAL-N
F.S.T.
2 to 13 (VHF), 14 to 69 (UHF) and 1 to 125 (Cable)
PANABLACK - 29” Flat CRT, 74 cm (NBR5258) - 68 cm diagonal visual
8 W + 8 W max (RMS)
1 (rear) + 1 (frontal)
1 (rear) + 1 (frontal)
1 (rear)
1 (rear) + 1 (headphone)
1 (rear)
786 x 578 x 508 mm
42,7 Kg
Color Television
© 2004 Panasonic da Amazônia S/A.
CS Division
Technical Support
Specifications are subject to change without notice. Weight and dimensions shown are approximate.
Order DCS - DEZ2004 - 001 - MS

Panasonic TC-29FJ30LA Specifications

General

Display Technology	CRT
Aspect Ratio	4:3
Screen Size	29 inches
TV Type	Standard Definition
Input Ports	Composite

Summary

Important Safety Notice

General Guidelines

Operating Instructions

IC601 Pinout

IC601 Block Diagram

DAC Control for GP3 Chassis Functions and Adjustments

How to Enter Service Mode

Describes the procedure to access the TV's service menu using remote and TV buttons.

Exiting Service Mode

Explains how to return to normal TV operation from service mode using the 'NORMAL' key.

CHK1 Mode Options

Details the adjustable options available in CHK1 service mode, including data input.

Adjustments Overview

CHK2 Mode VCJ Adjustments

Details adjustments for VCJ parameters using VOL keys in CHK2 service mode.

CHK3 Mode Pincushion Adjustments

Details adjustments for pincushion correction using VOL keys in CHK3 service mode.

CHK4 Mode White Balance Adjustments

Details white balance adjustments using VOL keys in CHK4 service mode.

Specific Adjustments and Confirmations

RF AGC Adjustment

Procedure to adjust RF Automatic Gain Control to a specific voltage level.

VIF Detector Output Level Confirmation

Buzzing Confirmation (Audio Circuit)

Anode and Heater Voltage Confirmation

Color and Protection Adjustments

PAL Color Output Signal Adjustment

Procedure for adjusting PAL color output signal levels and confirming RGB contrast.

NTSC Sub-Tint Calibration

Procedure for calibrating NTSC sub-tint levels and confirming OSD color change.

Protection Circuit Confirmation

Geometric and Purity Adjustments

Sub-Bright and Sub-Contrast Calibration

Focus Calibration

Purity Calibration

CRT and Convergence Calibration

White Quality Calibration

Convergence Calibration

CRT Cut Off Calibration

Deflection and White Balance Calibration

Vertical Deflection Calibration and Confirmation

White Balance Calibration

Schematic Diagrams