VIERA Link settings
To use all VIERA Link functions: After everything is connected, set VIERA
Link to On in VIERA Link settings menu.
Some features are disabled depending on the “HDAVI Control” version of the
equipment.
1. Display the menu
MENU Menu > Setup
2. Select VIERA Link settings
Select VIERA Link settings with
/ and press .
3. Select VIERA Link and set to On
Select VIERA Link and press
then select On with /
4. Select and set other VIERA Link settings
(Power on link/Power off link/Energy saving mode/Unselected device
auto off)
- 112 -
To Next Page
Loading...
