Network connection/Network status
1. Select Network connection using / and press
2. Select Quick setup to launch Network connection setup wizard.
Follow the directions on the screen to complete the network connection.
●
Manual settings are also available.
Select Custom and select your connection type.
Displays setting menu according to selected connection type.
Set the desired menu and complete the network connection.
3. Displays Network status
Select Try again and press
to start connection test.
Success
Completion message is displayed.
Error
Select Status details/Help and press to display solution of the
connection error.
Follow the directions on the screen to complete the network settings.
●
You can also display Network status from Network menu.
(Network > Network status)
4. Exit the screen
Select Done and press
to exit from this screen.
- 57 -
To Next Page
Loading...
