Care and Cleaning
Display panel
First, unplug the Power cord plug from the wall outlet.
■ Display panel
The front of the display panel has been specially treated. Wipe the panel
surface gently using only a cleaning cloth or a soft, lint-free cloth.
●
If the surface is particularly dirty, after cleaning up the dust, soak a soft,
lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap
diluted by 100 times the amount of water) and then wring the cloth to
remove excess liquid. Use this cloth to wipe the surface of the display
panel, then wipe it evenly with a dry cloth of the same type until the
surface is dry.
●
Do not scratch or hit the surface of the panel with fingernails or other hard
objects. Furthermore, avoid contact with volatile substances such as insect
sprays, solvents, and thinner, otherwise, the quality of the surface may be
adversely affected.
- 191 -
To Next Page
Loading...
