Blu-ray, DVD, Game Console, etc.
Connecting and viewing
1. Connect device
Verify that the device is connected to the TV properly and connect to
desired terminal. Note which terminal the device is connected to (HDMI 1,
HDMI 2, Component or Video)
Component and Composite (Video) in terminals are shared.
Please be careful not to confuse the connection when you use Component
or Video.
●
For Example of AV connections
See next section, Example of AV connections.
2. Select Input
1) Display Input select menu (with the connected equipment turned ON)
INPUT
2) Select the input used in step 1
Select correct input source, using
/ and press
When you connect to Component or Video input, you need to select
Video or Component.
●
Press INPUT and select AV: Video↔Component.
●
Press / to choose Video or Component.
●
To edit and customize the TV’s input label
All settings > Setup > Display customization
3) Operate using your device’s remote control
●
The menu choices vary depending on which input is selected.
- 36 -
To Next Page
Loading...
