Panasonic TC-L42D30

63
TC-L42D30 How to Enter the Self-check Mode
DISPLAY Check Ref.
No.
Description Check Point
PEAKS IC8000 PEAKS A-Board
TUN TU4801C TUNER A-Board
AVSW IC3001 AV SWITCH A-Board
STBY IC8000 PEAKS (STM) A-Board
MEM1 IC8902 EEPROM (PEAKS) A-Board
MEM2 IC8901 EEPROM (STM) A-Board
ZWEI ZWEI2 LCD PANEL
iPOD-CP IC3900 iPod-CP A-Board
ID ID
HDMI-SW IC4700 HDMI-SW A-Board
PEAKS OK
TUN OK
AVSW OK
STBY Ok
MEM1 OK
MEM2 OK
ZWEI OK
iPOD-CP NG
ID OK
HDMI-SW OK
Self Check
---.XXXXXX - XXXXXX
Copyright Panasonic Corporation 2011
Panasonic
ROM CHECK:
*****
How to access:
1. Self-check display only:
While in TV reception mode, press the [VOLUME ( - )] button on the main unit and simultaneously press the [OK] button
on the remote control for 3 seconds or more.
2. Self-check display and forced to factory shipment setting:
While in TV reception mode, press the [VOLUME ( - )] button on the main unit and simultaneously press the [MENU]
button on the remote control for 3 seconds or more.
How to Exit
Disconnect the AC cord from wall outlet.
Self Check Screen
NG_ Indicates a defective part.
When NG is displayed, replace the (A) board.