TC-L42E5
21
7.9. Plate Metal Part Assembly
1.
Place the metal parts in the positions indicated, insert the metal part guide pins into the holes on the panel, as shown in detail A.
2. Screw in the positions indicated using the corresponding torque.
3. Place the gasket in the position indicated. See detail B.
No. Part Num. Quant. Description
1 TUA5ZA03201 1 METAL_CH_FRAME_L
2 TUA5ZA04301 1 METAL_CH_FRAME_R
3 TEWB763 1 GASKET (T12*W10*L20)
To Next Page
Loading...
