Panasonic TC-P60ST60 - Disassembly Procedures; Pedestal Removal; Bottom Cover Removal; AC Cord Clamper B Removal

19
9.2. Disassembly Procedure for the Unit
9.2.1. Pedestal
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the 4 screws.
3. Remove the pedestal.
9.2.2. Bottom cover
1. Remove the 4 screws (THEC1509).
2. Remove the Bottom cover.
9.2.3. AC cord clamper B
1. Remove the 2 screws (THEL0239).
2. Remove the AC cord clamper B.
9.2.4. WiFi Dongle
1. Remove the screw THEC1509.
2. Remove the WiFi dongle.
9.2.5. Bluetooth Module
1. Remove the screw (XTV3+8GFJK).
2. Remove bluetooth cover.
3. Disconnect the BT connector.
4. Remove the Bluetooth module.