Panasonic TC-P60ST60 - P-Panel Removal; K-Panel Removal; SS-Panel Removal

21
9. Remove the 2 screws (THEJ036J).
10. Remove the Metal tuner.
9.2.8. P-Panel
Caution:
To remove the P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the connectors P2, P6, P9, P11 and P35.
2. Remove the screw (XYN4+F8FJ).
3. Remove the 5 screws (XYN3+F6FJ).
4. Remove the P-Panel.
9.2.9. K-Panel
1. Remove the 2 screws (THEC1509).
2. Remove the Led panel case.
3. Disconnect the connector K1.
4. Remove the K-Panel.
9.2.10. SS-Panel
1. Disconnect the connector SS11.
2. Disconnect the flexible cables SS33, SS62 and SS64.
3. Remove the 3 screws (XYN4+F8FJ).
4. Remove the 5 screws (XYN3+F6FJ).
5. Remove the SS-Panel.