24
9.2.20. USB Cable (A-WiFi)
1. Remove the screw (THEJ036J).
2. Remove the USB cable (A-WiFi).
9.2.21. Metal Bracket Bottom
1. Remove the 2 screws (THEJ036J).
2. Remove the 6 screws (XYN5+F12FJ).
3. Remove the Metal Bracket Bottom.
9.2.22. Cabinet
1. Place the Cabinet assy on a flat surface of a table
(covered by a soft cloth) and a cushion.
2. Remove the 6 screws (THEC141J).
3. Remove the top side.
4. Remove the 15 screws (THEC141J).
5. Remove the Cabinet assy from the Plasma.
9.2.23. Contact metals
1. Remove the 18 screws (THEJ036J).
2. Remove the Contact metal side R and L..