20 21
Advanced
How to Use Menu Functions
(picture, sound quality, etc.)
(Continued)
Menu list
Menu Item Adjustments/Configurations (alternatives)
Timer
Sleep
The TV can automatically turn Off at the designated time (0/15/30/60/90)
Lock
Locks the programs. (p. 22)
Closed
caption
Closed caption
Displays subtitles (Closed caption). (p. 26)
Setup
ANT/Cable setup
Sets channels. (p. 24)
Connected
devices
Input labels
Selects the terminal and label of the external equipment (p. 27)
Audio out
To prevent howling, stops output of audio specified in this menu. (p. 27) (On/Off)
ECO/energy saving
Power save
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
room. (Standard/Saving)
No signal for 10
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
•
Not in use when “Lock” is set, or while “SD mode” or “Digital Channel” is selected.
•
“No signal for 10 minutes was activated” will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by “No signal for 10
minutes”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
No activity for 3
hours
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
•
Not in use while “PC input” is selected.
•
“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Advanced
setup
Image viewer
auto play
Set “Thumbnail” to play back SD cards automatically.
(Thumbnail/Off)
About
Displays TV version and software license.
Reset to defaults
Performing Reset will clear all items set with Setup, such as channel settings.
How to Use Menu Functions
Menu list
Menu Item Adjustments/Configurations (alternatives)
Picture
Reset to defaults*
Resets all picture adjustments to factory default settings except for “Advanced picture”.
Picture mode
Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 32)
Back light
Adjusts the luminance of the back light.
Contrast, Brightness,
Color, Tint, Sharpness
Adjusts color, brightness, etc. for each picture mode to suit your taste
•
Display range
Contrast/Brightness/Color/Sharpness: 0 - 100
Tint: -50 - +50
Color temp.
Selects a choice of Cool (blue), Normal, or Warm (red) color. (Cool/Normal/Warm)
Color mgmt.
On: Enhances green and blue color reproduction, especialy outdoor scenes. (Off/On)
A.I. picture
Controls dark areas without affecting the black level or brightness in the overall picture
(Off/On)
C.A.T.S.
Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
Video NR
Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On)
Aspect
adjustments
Screen format
Changes the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Lets you choose the aspect depending on the format of received signal. (p. 30)
H size
Adjusts the horizontal display range to reduce noise of both side edges of an image. (Size 1/Size 2)
Size 2: Adjusts the image size according to the aspect mode for to reduce noise. (p. 32)
PC adjustments
Sets PC display (p. 16)
Advanced picture
3D Y/C filter
Minimizes noise and cross-color in the picture. (Off/On)
Color matrix
Selects image resolution of component-connected devices (SD/HD)
•
SD: Standard Definition HD: High Definition
•
Only used with 480p video signal.
MPEG NR
Reduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Black level
Selects Dark or Light. Valid only for external input signals. (Dark/Light)
Audio
Reset to defaults*
Resets Bass, Treble, and Balance adjustments to factory default settings.
Bass
Increases or decreases the bass response.
Treble
Increases or decreases the treble response.
Balance
Emphasizes the left / right speaker volume.
Advanced audio
Surround
Enhances audio response when listening to stereo. (Off/On)
Volume leveler
Minimizes volume disparity after switching to external inputs.
TV speakers
Switches to “Off” when using external speakers (Off/On)
•
“Surround” and “Volume leveler” do not work if “Off” is selected.
HDMI 1 in
HDMI 2 in
HDMI 3 in
The default setting is “Digital” for the HDMI connection. (Digital input signal)
Select audio input terminal when DVI cable is connected. (Analog audio input signal)
(Digital/Component/Video 1/Video 2)
In the AV mode, the Audio and Setup menus give fewer options.
* Confirmation screen is displayed. Select “Yes” and press OK to reset.
To Next Page
Loading...
