To Next PageTo Next PageWhat to do if my Panasonic TH-42LF25U has no picture?
If your Panasonic Monitor shows no picture, check if it's properly plugged into the AC outlet and switched on by pressing the power switch or stand-by button on the remote control. Also, verify the PICTURE and BRIGHTNESS/Volume settings.
Why does my Panasonic Monitor screen darken with bright pictures?
The Panasonic Monitor screen darkens slightly with bright pictures to reduce image retention and extend the screen's service life. This behavior is normal and not a sign of malfunctioning.
Why does my Panasonic TH-42LF25U Monitor power off automatically?
If your Panasonic Monitor unexpectedly turns off, check the settings of “POWER MANAGEMENT”, “NO SIGNAL POWER OFF” and “NO ACTIVITY POWER OFF” in the SET UP menu.
What to do if Panasonic TH-42LF25U Monitor remote control is not working?
If the remote control isn't working with your Panasonic Monitor, check if the remote control sensor is exposed to outdoor light or strong fluorescent light. Also, verify that you're using the remote control specifically designed for use with this unit.
Why does it take a while for the picture to appear on my Panasonic TH-42LF25U Monitor?
When the power has been turned on or the input has been switched, it sometimes takes a few moments for the picture to appear on the Panasonic Monitor. This is normal.
How to fix image retention on a Panasonic Monitor?
If you display a still picture on your Panasonic Monitor for an extended period, the image might remain on the screen. However, it will disappear after a while.
General| Screen Size | 42 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | IPS |
| Contrast Ratio | 1200:1 |
| Response Time | 8 ms |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178°/178° |
| Display Type | LCD |
| Connectivity | HDMI, VGA, Component, Composite |
