6.9. Remove the H-Board and TA-
Board
1. Unlock the cable clampers to free the cable.
2. Remove the screws (×2
) and remove the TA-Board.
3. Disconnect the coupler (H53).
4. Disconnect the flexible ables (H1, H2, H30 and H50).
5. Remove the screws (×3
) and remove the H-Board.
6.10. Remove the PA-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (PA7 and PA10).
3. Disconnect the flexible cables (PA20 and PA30).
4. Remove the screws (×4
) and remove the PA-Board.
6.11. Remove the Z-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the coupler (Z2).
3. Disconnect the flexible cable (Z50).
4. Remove the screws (×2
) and remove the Z-Board.
6.12. Remove the SU-Board
1. Remove the screws (×2 )
2. Slide the SU-Board to the left to disconnect from a coupler
(SC41 - SU41) on the SC-Board and disconnect a coupler
(SU45 or SC45).
3. Disconnect the flexible cables (SU1, SU2, SU3) connected
to the SU-Board, and remove the SU-Board.
12
TH-42PA50E / TH-42PE50B / TH-37PA50E / TH-37PE50B
To Next Page
Loading...
