Panasonic TH 42PD50U - Picture Menu Options; Basic Picture Adjustments; Picture Mode Presets

9 Serviceman Mode
9.1. How to enter into Serviceman Mode
While pressing [VOLUME- ] button of the main unit, press [RECALL] button of the remote control three times in a row (within 2
seconds).
9.1.1. Adjustment method.....Use the remote control.
“1” button...Main items Selection in forward direction
“2” button...Main items Selection in reverse direction
“3” button...Sub items Selection in forward direction
“4” button...Sub items Selection in reverse direction
“VOL” button...Value of sub items change in forward direction (
), in reverse direction ( )
9.2. Cancellation
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
9.3. Contents of adjustment mode
· Value is shown as a hexadecimal number.
· Preset value differs depending on models.
· After entering the adjustment mode, take note of the value in each item before starting adjustment.
Main item Sub item Sample Data
PCT-ADJ PICTUER 22D
PICTUER2 200
COLOR 30
TINT 0
S-BRT 800
RFAGC1 74
AGC-ADJ1 FIX
RFAGC2 74
AGC-ADJ2 FIX
OPTION BOOT SD
OPT00 1
ANT-POW OFF
POF-SET NORMAL
STB-SEC SEC
EMGCY OFF
CLK-ADJ 80
EEP COPY ALL
RM-SET COPY ALL
STB-CAS - -
24
TH-42PD50U