Panasonic TH-42PE7U - Basic Connection (Continued); Example 2 Connecting DVD recorder (VCR) (To record;playback)

6.15. Remove the S-Board
1. Remove the screws (×2 ) and remove the S-Board metal
frame.
2. Disconnect the connector (S2).
3. Remove the screws (×2
) and remove the S-Board.
6.16. Remove the K-Board
1. Remove the S-Board. (See section 6.15.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1). (See section 6.4.)
4. Remove the screws (×2
) and slide to the right to remove
the K-Board.
5. Disconnect the connectors (K1 and K2) and remove the K-
Board.
6.17. Remove the Plasma panel
section from the Cabinet assy
(glass)
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×3
each).
3. Replace the servicing stand and stand the set.
4. Remove the cabinet assy and the plasma panel fastening
screws (×7
).
5. For leaving the plasma panel from the cabinet assy, pull the
bottom of the front frame forward, lift, and remove.
12
TH-42PE7U