17
On-Screen Menu Displays
2
Press to access
each adjust
screen.
Press the R button to return to
previous menu screen.
Note : “Signal” setup menu displays different setting condition for each input signals. (see page 13)
To Signal screen for
Component (see page 39)
To Signal screen for RGB
(see page 39, 40)
Press the R button to return
to “Setup” menu.
Press to select POWER ON
Time / POWER OFF Time.
Press to Set up
POWER ON Time /
POWER OFF Time.
To Set up Timer selection
screen (see page 27, 28)
To PRESENT TIME Setup
(see page 27)
Press to return to next menu screen.
[ from the unit ]
To Signal screen for Digital
(see page 39, 40)
Press the R button to return
to “Setup” menu.
Press to Setup.
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
To setup Screensaver
(see page
29-31
)
To setup Multidisplay screen
(see page 33)
To Signal screen for AV
(S Video) (see page 38, 39)
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.
To Next Page
Loading...
