To Next PageTo Next PageWhy do the edges of the images flicker on my Panasonic TH-42PS9ES Monitor?
Due to the characteristics of the system used to drive the panel, the edges may appear to flicker in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.
Why does the screen on my Panasonic Monitor darken?
This is normal. The screen darkens slightly when bright pictures with minimal movements are shown to reduce after-image on the screen and prevent shortening of the screen’s service life.
What to do if Panasonic remote control operations cannot be performed?
If remote control operations cannot be performed on your Panasonic unit, start by checking the batteries. Ensure they haven't discharged completely and are inserted correctly. Also, verify that the remote control sensor isn't exposed to outdoor light or strong fluorescent light. Finally, confirm that you are using the remote control specifically designed for use with your unit.
Why does it take a while for the picture to appear on my Panasonic TH-42PS9ES?
It takes a while for the picture to appear on the Panasonic monitor because the unit digitally processes various signals. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched or when the images for the main picture and sub picture on the two screens are swapped.
Why does my Panasonic TH-42PS9ES Monitor make a cracking sound?
The cracking sound you sometimes hear from the Panasonic unit is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature. If there is nothing wrong with the picture or sound, this is normal.
Why do I hear sounds coming from inside the Panasonic unit?
When the power is turned on, a sound of the display panel being driven may be heard. This is normal and not indicative of malfunctioning.
Why are areas missing when I zoom on my Panasonic Monitor?
When using a video software program (such as a cinema size program) with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen.
Why can I hear sounds from inside my Panasonic TH-42PS9ES?
When the power is turned on, a sound of the display panel being driven may be heard: This is normal and not indicative of malfunctioning.
Why does it take so long for the picture to appear on my Panasonic TH-42PS9ES Monitor?
The unit digitally processes the various signals in order to reproduce esthetically pleasing images.
Why is there a lag between audio and image on my Panasonic Monitor?
This Plasma Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal. However, this is not a malfunction.
General| Screen Size | 42 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1024 x 768 |
| Aspect Ratio | 16:9 |
| Response Time | 0.001 ms |
| HDMI Ports | 2 |
| Weight | 28 kg |
| Viewing Angle | 160° |
| Input Ports | Component, Composite, HDMI |
