What to do if my Panasonic TH-42PS9ES Monitor has no picture?
If your Panasonic Monitor shows no picture, try the following: * Press the power switch or stand-by button on the remote control. * Ensure the monitor is plugged into an AC outlet. * Make sure the unit is switched on.
Why is my Panasonic Monitor making whirring sounds?
Whirring sounds from the Panasonic Monitor indicate that the cooling fan is working to dissipate heat generated during normal use.
Why isn't my Panasonic TH-42PS9ES remote control working?
If the Panasonic Monitor remote control isn't working, check these: * See if the batteries have completely discharged or if they were inserted properly. * Make sure the remote control sensor isn't exposed to outdoor light or strong fluorescent light. * Verify that the remote control is specifically designed for use with the unit.
How to fix no sound on my Panasonic TH-42PS9ES?
If your Panasonic Monitor has no sound, consider the following: * Check if the mute function is activated on the remote control. * Press the power switch or stand-by button on the remote control. * Ensure the monitor is plugged into an AC outlet. * Make sure the unit is switched on. * Check the Picture and Brightness/Volume settings.
Why do I hear sounds coming from inside the Panasonic unit?
When the power is turned on, a sound of the display panel being driven may be heard. This is normal and not indicative of malfunctioning.
Why does my Panasonic TH-42PS9ES Monitor make a cracking sound?
The cracking sound you sometimes hear from the Panasonic unit is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature. If there is nothing wrong with the picture or sound, this is normal.
Why does it take a while for the picture to appear on my Panasonic TH-42PS9ES?
It takes a while for the picture to appear on the Panasonic monitor because the unit digitally processes various signals. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched or when the images for the main picture and sub picture on the two screens are swapped.
What to do if Panasonic remote control operations cannot be performed?
If remote control operations cannot be performed on your Panasonic unit, start by checking the batteries. Ensure they haven't discharged completely and are inserted correctly. Also, verify that the remote control sensor isn't exposed to outdoor light or strong fluorescent light. Finally, confirm that you are using the remote control specifically designed for use with your unit.
Why does the screen on my Panasonic Monitor darken?
This is normal. The screen darkens slightly when bright pictures with minimal movements are shown to reduce after-image on the screen and prevent shortening of the screen’s service life.
General| Screen Size | 42 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1024 x 768 |
| Aspect Ratio | 16:9 |
| Response Time | 0.001 ms |
| HDMI Ports | 2 |
| Weight | 28 kg |
| Viewing Angle | 160° |
| Input Ports | Component, Composite, HDMI |
To Next Page