Panasonic TH-42PW4

33
Setup for Input Signals
Component/RGB-in Select
Select the input signals to be connected by installing the Optional Terminal Board.
(Refer to the service manual for the optional Terminal Board.)
Select to match the signals from the source connected to the Component/RGB input terminals.
Y, PB, PR signals “Component”
R, G, B, HD, VD signals “RGB”
SURROUND
VOL
N
SOUND
INPUT
ASPECT
PICTURE
POS. /SIZE
R
PICTURE SET UP
SET UP
1
2
Press to display the Setup menu screen.
Press to select the “Component/RGB-in
Select”.
Press to select the desired mode.
Press to exit from adjust mode.
3D Y/C Filter – For NTSC video images
Select “Signal” from the “Setup” menu during AV input signal mode. (“Signal
[AV]” menu is displayed.)
3D Y/C Filter
(
NTSC
)
Colour system
Panasonic Auto
(
4:3
)
On
Auto
4 : 3
Signal
[
AV
]
Press to select the “3D Y/C Filter (NTSC)”
Press to set On/Off.
R
Press to exit from adjust mode.
Press (Action) button
Note:
When on, this setting only affects NTSC input signals.
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language
English
(
UK
)
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language
English
(
UK
)
Component RGB
R