Options
Enable
Off-timer function
Normal
Initial Power Mode
Off
Power On Screen Delay
Off
Clock Display
2/2
Power On Message (No activity power off)
On
Options
1/2
Initial input
On screen display
On
Off
Off
Off
0
0
Maximum VOL level
Initial VOL level
Off
Input lock
Off
Button lock
Off
Remocon User level
Failover input
Off
41
Options Adjustments
Item Adjustments
On screen display
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
was pressed.
Off: Hides all the items above from view.
Initial input
Adjusts the input signal when the unit is turned on.
Off
VIDEO Component/RGB PC DVI HDMI1 HDMI2 Off
Notes:
• Only the adjusted signal is displayed. (see page 15)
• This menu is available only when “Input lock” is “Off”.
Failover input
When there is no signal, the specifi ed input signal is automatically switched to.
Off
VIDEO Component/RGB PC DVI HDMI1 HDMI2 Off
Notes:
•
When other than “Off” is set, “Input lock” will be grayed out and cannot be set.
• When “Input lock” is set to other than “Off”, this setting will be grayed out and cannot be set.
Initial VOL level
Press
button to adjust the volume when the unit is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
•
When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL level
Press
button to adjust the maximum volume.
Off
On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
becomes the same as the “Maximum VOL level”.
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
1
Press to display the Setup menu.
5
Press to exit from Options menu.
2
4
3
Press to select “OSD Language”.
Press for more than 3 seconds.
Press to select “Options”.
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Options
Shipping
To Next Page
Loading...
