Italiano
Español
ENGLISH (US)
English (UK)
Deutsch
Français
OSD Language
PRESENT TIME Setup
PRESENT TIME MON 99 : 99
Set
PRESENT TIME
99 : 99
DAY
MON
PRESENT TIME Setup
PRESENT TIME MON 99 : 99
Set
PRESENT TIME
10 : 00
DAY
TUE
Power ON warning message
The following message may be displayed when turning the unit power ON:
No activity power off Precautions
’No activity power off’ is enabled.
If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time
the power is turned ON. (see page 32)
This message display can be set with the following menu: Options menu
Power On Message (see page 40)
Note:
The fans start to spin about 90 seconds after Power is ON. The fans spin while the Display power is ON.
16
Power On / Off
When fi rst switching on the unit
Following screen will be displayed when the unit is turned on for the fi rst time.
Select the items with the remote control. Unit buttons are invalid.
OSD Language
PRESENT TIME Setup
1
Select the language.
2
Set.
1
Select “DAY” or “PRESENT TIME”.
2
Setup “DAY” or “PRESENT TIME”.
Notes:
• Once the items are set, the screens won't be displayed when switching on the unit next time.
• After the setting, the items can be changed in the following menus.
OSD Language (see page 34)
PRESENT TIME Setup (see page 28)
No activity power off (see page 32)
1
Select “Set”.
2
Set.
Display will be turned off
when there is no activity for 4 hours.
Disable Enable
No activity power off
Are you sure
you want to enable ’No activity power off’ ?
NoYes
No activity power off
1
To enable No activity power off, select “Enable”.
2
Set.
1
“Select “Yes” or “No”.
2
Set.
If selecting “Enable”, a
confi rmation window appears.
No activity power off
To Next Page
Loading...
