6.1. Remove the Back cover
1. See Service Hint (Section 5)
6.2. Remove the fan
1. Disconnect the relay couplers.
2. Remove the screws (×3
each) and remove the fans.
6.3. Remove the Speaker box ass’y
(left)
1. Unlock the cable clampers to free the cables.
2. Disconnect the relay coupler.
3. Remove the Speaker box ass’y (left).
6.4. Remove the Speaker box ass’y
(right)
1. Unlock the cable clampers to free the cable.
2. Disconnect the relay coupler.
3. Remove the Speaker box ass’y (right).
6.5. Remove the rear terminal
cover
1. Remove the screws (×6 ,×6 ,×2 ).
2. Remove the rear terminal cover.
6 Plasma panel replacement method
10
TH-42PX600U
To Next Page
Loading...
