To Next PageTo Next PageWhat to do if Panasonic Monitor displays 'no picture' error?
If a display error like “no picture” appears or the remote control stops working on your Panasonic Monitor, remove the power plug from the socket, wait for at least 5 seconds, and then reinsert it to turn the power back on.
How to fix no color on Panasonic Monitor?
If your Panasonic Monitor displays no color, check if the color controls are set to the minimum level. Adjust them as needed.
What to do if my Panasonic TH-55AF1U has no picture?
If your Panasonic Monitor displays no picture, ensure it is properly plugged into an AC outlet and switched on. Also, verify the Picture and Brightness/Volume settings by pressing the or the .
How to fix no sound on Panasonic TH-55AF1U?
If there is no sound coming from your Panasonic Monitor, check whether the mute function has been activated on the remote control by adjusting the volume.
Why is my Panasonic TH-55AF1U Monitor remote control not working?
If you cannot perform remote control operations on your Panasonic Monitor, verify the following: * Check the batteries. Ensure they are not discharged and are inserted correctly. * Make sure the remote control sensor is not exposed to outdoor light or strong fluorescent light. * Confirm there are no obstacles between the remote control and the sensor. * If normally installed, pull out the remote control sensor from the edge side of the main unit when using. * Ensure you are using the remote control specifically designed for this unit. * Check that [Controller user level] in the [Options] menu is set to [Off].
Why does my Panasonic TH-55AF1U Monitor power off automatically?
If your Panasonic Monitor unexpectedly turns off, examine the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DVI-D power management], [PC power management] and [No activity power off]. Ensure none of these are set to [On (Enable)].
General