Panasonic TH-75EQ1W - Page 18

18
English
Cable fixing
Note
●
3 clampers are supplied with this unit. Fix the cables
at 3 locations using the holes for clampers as shown
below.
●
Before turning the power on, stop the holes (3
locations) with the clampers.
Otherwise, foreign objects may enter the holes,
resulting in a fire.
•
If you need more clampers, purchase them from
your dealer. (Available from the customer service)
86-inch model
75-inch model
65-inch model
55-inch model
50-inch model
43-inch model
1. Attach the clamper
Keep pushing both side
snaps and pull out the
clamper.
hole
Insert the clamper in a
hole.
To remove from
the unit:
snaps
2. Bundle the cables
Keep pushing the knob
and pull out the tip.
hooks
Set the tip in the hooks
and tighten.
To loosen:
knob