To Next PageTo Next PageHow to fix cut off picture on Panasonic TH-70SF2HU?
If the top or bottom of the picture on the screen is cut off on your Panasonic Monitor, adjust the position of the picture on the screen, because the image position has been adjusted in the [Position] menu.
How to fix Panasonic Monitor when there is picture but no sound?
If your Panasonic Monitor displays a normal picture but has no sound, ensure that the mute function on the remote control hasn't been activated.
What to do if my Panasonic Monitor has no picture and no sound?
If your Panasonic Monitor isn't displaying a picture and there's no sound, verify that the device is properly plugged into the AC outlet and switched on. Also, check the Picture and Brightness/Volume settings by pressing the or the .
Why is my Panasonic TH-70SF2HU Monitor remote control not working?
If your Panasonic Monitor remote control isn't working, check if the batteries are completely discharged or improperly inserted. Also, ensure that the remote control sensor isn't exposed to outdoor light or strong fluorescent light and that there are no obstacles between the sensor and the remote.
Why is there no picture or sound from the DIGITAL LINK terminal on my Panasonic TH-70SF2HU?
If there is no picture displayed or sound output from the [DIGITAL LINK] terminal, check whether the connection has been made properly between the video (output) equipment and twisted pair cable transmitter and between the twisted pair cable transmitter and this product.
Why does my Panasonic TH-70SF2HU screen darken with bright pictures?
The screen darkens slightly when bright pictures with minimal movements are shown to reduce image retention on the screen and the shortening of the screen’s service life. This is normal and not indicative of malfunctioning.
Why are there spots on my Panasonic TH-70SF2HU screen?
The red, blue, green, and black spots that may appear on your Panasonic Monitor screen are a characteristic of liquid crystal panels and are not a problem.
How to fix image retention on Panasonic TH-70SF2HU?
If image retention appears on your Panasonic Monitor, display a general moving picture for a while to make it disappear.
Why is there no picture or sound from Panasonic Monitor's [DIGITAL LINK] terminal?
If there's no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check the connection between the video (output) equipment and the twisted pair cable transmitter. Also, ensure that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
Why is the RS-232C uncontrollable on my Panasonic TH-70SF2HU?
If the RS-232C is uncontrollable on your Panasonic Monitor, check if the connection has been made properly and ensure that [Network settings] - [Serial control] is set to [SERIAL IN].
General| Screen Size | 70 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Weight | 31.5 kg |
| Built-in Speakers | Yes (10 W x 2) |
| VESA Mounting | 400 x 400 mm |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° |
| DisplayPort | 1 |
| Output Terminals | Audio Out |
| Input Ports | HDMI |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1, 200:1 |
| Response Time | 8 ms |
Precautions for display stability and child safety.
Setup warnings, including mandatory use of specific accessories and proper installation.
Guidelines for safe wall or pedestal mounting, including professional installation.
Warnings against outdoor use and improper installation environments.
Procedure for connecting the AC power cord and securing it.
Step-by-step guide for connecting the power cord to the display unit.
Instructions for turning the unit on using the main power button.
How to operate the unit's power using the remote control.
Automatically corrects position, size, clock phase, and dot clock for PC signals.
Configures settings related to input signals like HDMI, DVI, PC, and VIDEO.
Provides instructions for physically connecting the display's LAN terminal.
Immediate actions to take when malfunctions like smoke or liquid ingress occur.
Saves the current picture settings as a selectable profile.
Applies previously saved picture settings profiles.
Enables or disables the display of startup or no-signal images.
Selects the RS-232C serial control method (SERIAL IN or DIGITAL LINK).
Enables or disables network control via the LAN terminal.
Configures IP address, subnet mask, gateway, and port for network connection.
Enables or disables the USB media player function.
Enables scheduled playback using external software.
Enables or disables the automatic input switching feature.
Sets the speed of switching to a backup input (Quick or Normal).
Selects the first priority input to switch to if the main input fails.
Utilizes Crestron Connected™ for monitoring and controlling the display.
Enters the mode for playing content according to a predefined schedule.
Plays specified content at scheduled times, supporting various file formats.
Instructions for physically connecting HDMI-CEC compatible devices.
Steps to enable and configure the HDMI-CEC function.
Step-by-step guide for cloning settings to another display over the network.
Instructions for creating a .sh file to save network configuration settings.
