B
Benjamin DaviesSep 13, 2025
Why is there no color on my Panasonic Monitor?
- AAlvin BakerSep 13, 2025
If your Panasonic Monitor displays no color, the color controls might be set at the minimum level.
To Next PageTo Next PageWhy is there no color on my Panasonic Monitor?
If your Panasonic Monitor displays no color, the color controls might be set at the minimum level.
How to fix Panasonic Monitor when there is picture but no sound?
If your Panasonic Monitor displays a normal picture but has no sound, ensure that the mute function on the remote control hasn't been activated.
What to do if my Panasonic Monitor has no picture and no sound?
If your Panasonic Monitor isn't displaying a picture and there's no sound, verify that the device is properly plugged into the AC outlet and switched on. Also, check the Picture and Brightness/Volume settings by pressing the or the .
Why is my Panasonic TH-70SF2HU Monitor remote control not working?
If your Panasonic Monitor remote control isn't working, check if the batteries are completely discharged or improperly inserted. Also, ensure that the remote control sensor isn't exposed to outdoor light or strong fluorescent light and that there are no obstacles between the sensor and the remote.
Why does my Panasonic TH-70SF2HU Monitor power off automatically?
If your Panasonic Monitor's power unexpectedly turns off, check the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DIGITAL LINK power management], [DVI-D power management], [PC power management] and [No activity power off].
What to do if my Panasonic Monitor has no picture?
If your Panasonic Monitor displays no picture, ensure it is plugged into the AC outlet and switched on. Check the picture and brightness/volume settings by pressing the or the .
Why are there spots on my Panasonic TH-70SF2HU screen?
The red, blue, green, and black spots that may appear on your Panasonic Monitor screen are a characteristic of liquid crystal panels and are not a problem.
How to fix image retention on Panasonic TH-70SF2HU?
If image retention appears on your Panasonic Monitor, display a general moving picture for a while to make it disappear.
Why is there no picture or sound from Panasonic Monitor's [DIGITAL LINK] terminal?
If there's no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check the connection between the video (output) equipment and the twisted pair cable transmitter. Also, ensure that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
Why is the RS-232C uncontrollable on my Panasonic TH-70SF2HU?
If the RS-232C is uncontrollable on your Panasonic Monitor, check if the connection has been made properly and ensure that [Network settings] - [Serial control] is set to [SERIAL IN].
General| Screen Size | 70 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Weight | 31.5 kg |
| Built-in Speakers | Yes (10 W x 2) |
| VESA Mounting | 400 x 400 mm |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° |
| DisplayPort | 1 |
| Output Terminals | Audio Out |
| Input Ports | HDMI |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1, 200:1 |
| Response Time | 8 ms |
