To Next PageTo Next PageWhat to do if my Panasonic Monitor has no picture and no sound?
If your Panasonic Monitor isn't displaying a picture and there's no sound, verify that the device is properly plugged into the AC outlet and switched on. Also, check the Picture and Brightness/Volume settings by pressing the or the .
How to fix Panasonic Monitor when there is picture but no sound?
If your Panasonic Monitor displays a normal picture but has no sound, ensure that the mute function on the remote control hasn't been activated.
General| Screen Size | 70 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Weight | 31.5 kg |
| Built-in Speakers | Yes (10 W x 2) |
| VESA Mounting | 400 x 400 mm |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° |
| DisplayPort | 1 |
| Output Terminals | Audio Out |
| Input Ports | HDMI |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1, 200:1 |
| Response Time | 8 ms |
Precautions for display stability and child safety.
Setup warnings, including mandatory use of specific accessories and proper installation.
Guidelines for safe wall or pedestal mounting, including professional installation.
Warnings against outdoor use and improper installation environments.
Procedure for connecting the AC power cord and securing it.
Step-by-step guide for connecting the power cord to the display unit.
Instructions for turning the unit on using the main power button.
How to operate the unit's power using the remote control.
Automatically corrects position, size, clock phase, and dot clock for PC signals.
Configures settings related to input signals like HDMI, DVI, PC, and VIDEO.
Provides instructions for physically connecting the display's LAN terminal.
Immediate actions to take when malfunctions like smoke or liquid ingress occur.
Saves the current picture settings as a selectable profile.
Applies previously saved picture settings profiles.
Enables or disables the display of startup or no-signal images.
Selects the RS-232C serial control method (SERIAL IN or DIGITAL LINK).
Enables or disables network control via the LAN terminal.
Configures IP address, subnet mask, gateway, and port for network connection.
Enables or disables the USB media player function.
Enables scheduled playback using external software.
Enables or disables the automatic input switching feature.
Sets the speed of switching to a backup input (Quick or Normal).
Selects the first priority input to switch to if the main input fails.
Utilizes Crestron Connected™ for monitoring and controlling the display.
Enters the mode for playing content according to a predefined schedule.
Plays specified content at scheduled times, supporting various file formats.
Instructions for physically connecting HDMI-CEC compatible devices.
Steps to enable and configure the HDMI-CEC function.
Step-by-step guide for cloning settings to another display over the network.
Instructions for creating a .sh file to save network configuration settings.
