To Next PageTo Next PageWhy does it take a while for the picture to appear on my Panasonic TH-80SF2HU?
The time it takes for the picture to appear on your Panasonic Monitor is due to the unit digitally processing various signals.
Why does my Panasonic TH-80SF2HU screen darken slightly?
The slight darkening of the Panasonic Monitor screen when bright pictures with minimal movements are shown is normal. This is done to reduce image retention and extend the screen's service life and is not indicative of malfunctioning.
Why won't a file play on Panasonic TH-80SF2HU's 'Memory viewer'?
If a file plays back with “USB media player” but not with “Memory viewer” on your Panasonic Monitor, check the playback file specifications of both “USB media player” and “Memory viewer.”
How to adjust screen position on Panasonic TH-80SF2HU?
If the top or bottom of the picture is cut off on your Panasonic Monitor screen, adjust the picture position in the [Position] menu.
Why is there no picture or sound from Panasonic TH-80SF2HU's [DIGITAL LINK] terminal?
If there's no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check the connection between the video (output) equipment and the twisted pair cable transmitter. Also, ensure that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
Why is the LAN uncontrollable on my Panasonic Monitor?
If the LAN is uncontrollable on your Panasonic Monitor, verify that the connection has been made properly, [Network settings] - [Network control] is set to [On], and [LAN setup] is configured correctly.
Why is the RS-232C uncontrollable on my Panasonic Monitor?
If the RS-232C is uncontrollable on your Panasonic Monitor, check if the connection has been made properly and ensure that [Network settings] - [Serial control] is set to [SERIAL IN].
What to do if Panasonic TH-80SF2HU sometimes has no picture or sound?
If you sometimes experience no picture or sound output from your Panasonic Monitor, try powering it off and on again. Alternatively, replace the selector or distributor.
How to enable [Controller ID function] on Panasonic TH-80SF2HU Monitor?
To enable the [Controller ID function] on your Panasonic Monitor, verify that the [Controller ID function] is set to [On], or the switch is set to .
What to do if my Panasonic Monitor has no picture but normal sound?
If there's no picture but normal sound on your Panasonic Monitor, check if the input signal has a non-applicable color system format or frequency.
General| Screen Size | 80 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle (Horizontal/Vertical) | 178°/178° |
| Operating Temperature | 0°C to 40°C |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1, 200:1 |
| Input Terminals | HDMI, DVI-D, VGA, USB |
| Output Terminals | Audio Out |
| Built-in Speakers | Yes |
| Power Consumption | 320 W |
