142
English
Initialization
When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] settings, set all the
values [Off] so that all the buttons are enabled again.
Press <- (Unit)> together with <RETURN>
and hold for more than 5 seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
Yes No
●
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].
Initializing the
[Controller user
level]
When remote control buttons are disabled due to the
[Controller user level] (page 89) setting, set the value
[Off] so that all the buttons are enabled again.
Press <SETUP> and hold for more than
5 seconds.
●
Setting for [Controller user level] will be back to [Off].
Note
●
For 98/86/65/55/49 inch models, this setting is
available only when the main software version is
4.0000 or later.
To Next Page
Loading...
