Panasonic TH-98SQE1W - Page 31

English
USB
Clone to USB

Note: Make the Software Version of cloning source and destination same. Make the Model (CQE1W,
SQE1W) of cloning source and destination same. After Clone from USB, this display will reboot
automatically.
Clone from USB

Copy app cache
from USB

Note: This feature may not be available depending on the model of your unit.
USB Information
Press ENTERUSB informationTotal space
Free space
Format Disk

USB Operations
ENTER

 
USB Option
󰀨5V


Safely Remove

ENTER



Video Wall Settings
Press ENTERVideo Wall SettingsVideo Wall Settings
Row Count, Column Count, Cell󰀨
Video Wall Settings:Left/
Right directional buttons.
Row count:Left/Right directional

Column count: Left/Right

Cell:
Left/Right
to disable video wall function of the unit and display the image in full-screen mode,
the Cell option should be set as 0.
Oset:          


For example; For a 2x3 video wall matrix, Row count option should be set as 2 and
Column count option should be set as 3. Numbers of the cells in a video wall matrix will

positioned same as the Display with the number 1 in this template, then the Cell option
should be set as 1 for this Display.