Panasonic TH-98SQE1W - Page 32

English
SLOT Settings
Press ENTERSLOT Settings

SLOT Status: Displays whether the 

Boot Signal:
status signal of the 
 send incorrect information on their status during the bootup of


 regardless of the received status information at bootup.
Powerdown: Turns the 
Recovery Mode: When this
option is enabled and  is on, if there is no video
   
reboots .
SLOT Always on: When this option is enabled, Power Mode will be forced to reactive
and greyed out in the menu and  will not be set to standby.
Power Off Mode: When this option is Normal, wait for a response from SLOT.
After receiving the response, turn off the Display. When this option is Force, wait
for a response from SLOT for about 10 seconds. If there is no response, forcibly
turn off the Display. If SLOT Always On option is set as Enabled, this option will
not be available.
Note: