16
5.2. Display unit
5.2.1. How to enter into Service Mode
Service mode of display unit have 2 versions.
1. Separate mode: Normal mode (Connect the Display unit and Tuner Box).
Enter: Monitor mode (See section 5.1.2.).
2. Stand alone mode: WB-ADJ mode (Connect the Display unit and HDMI equipment (Ex. DIGA) with HDMI cable).
Tools: IR remote control (Recommended IR remote control 09’ PDP / LCD models).
Enter: While pressing [VOLUME (-)] button of the Display unit, press [0] button of the IR remote control 3 times within 2 sec-
onds.
5.2.1.1. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[RED] button...All Sub items Selection in forward direction
[GREEN] button...All Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
To Next Page
Loading...
